금속 작업 기계 / 기타 금속 가공 기계
생산자: DMG MORI
모델:DMF 200|8
품목 아니오.: 168881178
양: 1
날짜: 17.03.2026
위치:
독일
값:
Seller-item-No.:030344
| General | |
| Traveling column machine; Control: CELOS X with HEIDENHAIN TNC7 | |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 50000/50000/50000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 80/80/80 m/min |
| Tool changer | |
| Type of magazine | Chain |
| Number of tools | 50 |
| Max. tool weight | 6 Kg |
| Max. tool length | 300 mm |
| Max. tool diameter with occupied adjacent pockets | 80 mm |
| Max. tool dia. with free neighbouring pockets | 130 mm |
| Working area 1 | |
| Longitudinal | 2000 mm |
| Cross | 800 mm |
| Vertical | 850 mm |
| Swivelhead, B-axis | Controlled NC swivel milling head 12,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12 |
| Drive power (100% DC) 32 kW | |
| Dynamic package for DMF 200|8 linear | Dynamic package for DMF 200|8 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motor |
| Clamping System HSK-A 100 | |
| Spindle taper HSK-A 100 | |
| Speed range 20 -12000 rpm | |
| Torque (40% DC) 288 Nm | |
| Torque (100% DC) 187 Nm | |
| Drive power (40% DC) 44 kW | |
| Rigid table with integrated rotary axis (centre) | Rigid table with integrated round table d 800 mm // 31.49 in located in the middle of table table load max. 800 kg // 1763 lbs |
| Direct measuring system | Direct path measuring system |
| Cabine | Full protection cabin |
| Spindle speed 12,000 rpm, 288 Nm | Motor spindle powerMASTER HSK-A100 Spindle speed 20 - 12.000 min-1 for tool holder according to DIN 69893 Output 44/32 kW (59.0/42.9 hp) Torque 288/187 Nm (213.12/138.38 ft lbs) (40/100% duty cycle) Tool magazine 30 places HSK-A100 |
| Tool magazine 50 places | Tool magazine 50 places SK50/HSK-A100 Chain type with double gripper |
| Infrared measuring probe TS460 | Infrared touch probe for ISO 50 make Heidenhain TS 460 Tool taper suitable for the spindle |
| 3D quickSET elevated constructuion | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe) |
| Tool laser measuring Blum | Laser tool measuring Blum LC50 DIGILOG Measurement of length and diameter Automatic cleaning with external air blast Calibration Tool with tool holder (not with TT 140/160 possible, for pendulum machining, please order 2 pieces) |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air, low oil rate possible |
| Internal Coolant Supply 80bar/980l frequency controlled | Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle double |
| Coolant tempering for internal coolant from 980l | Coolant tempering for internal coolant unit 980l or 1300l / 259 or 344 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 80bar/980l or 1300l frequency controlled) |
| Chip flushing for working area | Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included (only available starting internal coolant supply 980l) |
| Oil mist separator | Oil and emulsion mist separator mechanical filter system 1600 m³/h |
| RTF Bezeichnung Gültig ab fester Serienbezug Letzte Änderung Geändert von Aktion Door drive for working area doors | Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents |
| Sensor package i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| Maintenance Package I4.0 | Maintenance Package I4.0: measurement of tool pull-in force autom. lubrication of tool clamp monitoring of pneumatics |
| Interpolation turning | Interpolation turning for the machining of internal and external diameter using spindle orientation |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| CAD Import | CAD Import: Open CAD files directly in the TNC 640 Extracting of counters and machining positions Supported file formats: DXF; IGES; STEP Supported elements: Line; Circle; Circular arc; Polyline |
| ATC (Application Tuning Cycle) | ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| 2017 | DMG MORI | DMF 260-11 Linear | |
| 2012 | DMG MORI | DMF 260-7 | |
| DMG MORI | DMC 200 U | ||
| 2015 | DMG MORI | CTX BETA 2000 TC | |
| 2020 | DMG MORI | CTX Beta 2000 | 235000 EUR |
| 2014 | DMG MORI | NLX 2000SY/500 | |
| 2017 | DMG MORI | NRX 2000MC | |
| DMG MORI | CTX gamma 2000 TC | ||
| 2016 | DMG MORI | NLX 2000 SY/500 | |
| 2020 | DMG MORI | CTX 2000 |
